Description
：
The Kreg® Rip-Cut™ transforms your circular saw into a precision edge-guided cutting tool that makes straight, accurate, and repeatable cuts in plywood, MDF, and other large laminated materials. With the Rip-Cut™, you can cut with confidence and the accuracy you need. The Rip-Cut™ easily makes straight, accurate, and repeatable cuts without having to measure, mark, or hold the saw on the cut line. It does this with a long cutting guide that follows the straight edge of the sheet you’re cutting. So, simply lock the saw at the desired measurement (up to 610 mm) using the built-in measuring scale, then make your cut. With this built-in measuring scale, you also don’t need to measure and mark each cut. Simply lock the saw slide at the desired cutting width, and you’re ready to go, whether you need to cut one piece or make several pieces of the same size. The Rip-Cut™ is very easy to use. Simply mount your saw on the universal slide, then slide the slide along the aluminum rail. After a simple one-time calibration, you can lock in your cut. Then simply hold the cutting guide against the edge of your sheet to guide the saw. You’ll get straight, accurate, and repeatable cuts easily and consistently.
